Why is the LED light not uniform

Why is the LED light emitting unevenly?

Incorrect installation of the lamp belt will also affect the lighting effect.

If the wall painting is not smooth, the light will be irregular, which we can solve by using the installation frame. The luminous angle of LED strip is usually only 120 °， Some light slots are too high for us to see the light produced by the LED strip. In this regard, it is better to pad up the LED light belt so that the distance between the light belt and the top edge of the light groove is about 4-5cm, or stick the light belt on the side wall.

If the lamp belt is too long and the tail brightness is not enough, a higher power constant voltage driver can be used. For example, 4A electric appliance is used for the 6-meter lamp belt to ensure that there is enough margin for the electric appliance and not to cause waste; You can also change the connection mode of the light belt to solve the problem of the tail not bright.

The installation of LED light band should be combined with different indoor and outdoor environments, and installed correctly according to the actual use, so as to ensure good lighting effect and prolong the service life.

LED soft light belt is mainly installed in the lamp trough to create a large area of luminous ceiling and wall, and shape the effect of wall washing. It is precisely because of its large light irradiation range, so once there is a problem, it will affect the large range of light and shadow effect. When we choose the LED light band, we must polish our eyes and choose carefully.