横幅
首页 > 展厅
Alexa And Google Home Amazon Hot Sale Oem Odm Led Drivers Wholesale Ble Wifi Zigbee Dimmable Wireless Led Driver For Led Light

Alexa And Google Home Amazon Hot Sale Oem Odm Led Drivers Wholesale Ble Wifi Zigbee Dimmable Wireless Led Driver For Led Light

Mean Well LDC-80 系列 LED 驱动器是一款 80W 交流/直流可调光 LED 驱动器,具有恒功率模式输出。LDC-80 LED 驱动器的工作电压范围为 180~295VAC,输出电流可在 700mA 至 2100mA 之间调节。.

发送询价

We hire a professional technical team with high wages to ensure the quality of the 3d acrylic letters, linear led strip light, full array led and fast improvements. Culturally, suppliers can be reluctant to question points they do not understand. We have the three major advantageous resources of reputation, brand and team, which ensure the stable and sustainable growth and healthy development of the company. At the same time, we hope to receive strong support and assistance from all walks of life in the long-term development process.

MeanWell 可调光 LED 驱动器

Mean Well LDC-80 series LED driver is a 80W AC/DC dimmable LED driver featuring the constant power mode output. LDC-80 LED driver operates from 1 80~295VAC and output current can be adjusted between 700mA to 2100mA.

Meanwell 80W dimmable LED driver

Thanks to the efficiency up to 90%, with the fanless design, the entire linear LED driver series is able to

operate for -25°C~+85C case temperature under free air convection. LDC-80 Mean Well LED driver is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.


Features:

Constant power mode output

Metal housing design

Full Power at 70~1 00% max Current

Built-in active PFC function

Flicker Free design

No load / Standby power consumption <0.5W

Output current level pre-settable

Function options:3 in 1 dimming (dim-to-off); DALI interface, push dimming

Typical lifetime> 50000 hours

SELV and Isolated Class 2 power supply

5 years warranty


Mechanical Specification

LDC-80


Dimming Operation

※ 3 in 1 dimming function(for B-Type)

●Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:

0~ 10VDC, or 10V PWM signal or resistance.

●Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.

●Dimming source current from power supply: 100μA(typ.)

Note:

1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.

2. The output current could drop down to 0% when dimming input is about 0Vdc or 10V PWM signal with 0% duty cycle.

3. To ensure the dimming performance at low dimming level,output current must be over 80mA.


DALI Interface

◎PUSH dimming(primary side)

ActionAction durationFunction
Short push0.1~1 sec.Turn ON-OFF the driver
Long push1.5~10 sec.Every Long Push changes the dimming direction, dimming up or down
Reset>11 sec,Set up the dimming level to 100%

●The factory default dimming level is at 100%.

●Ilfthe push action lasts less than 0.05 sec, it will not lead to a change for the status of the driver.

●Up to 10 drivers can perform the PUSH dimming at the same time when tilzing one common push button.

●The maximum length of the cable from the push button to the last driver is 20 meters.

●The additive push button can be connected only between the LS terminal, as displayed in the diagram,

and AC/L (in brown or black); it will lead to short circuit if it is connected to AC/N,

◎DALIinterface(primary side)

●Apply DALI signal between DA+ and DA-

●DALI protocol comprises 16 groups and 64 addresses.

●First step is fixed at 8% of rated output power.

NOTE: DALI, Push dimming can not be used in the same time!(The factory setting defaults to DA)


TEMPERATURE COMPENSATION OPERATION

LDC-80 have the built-in temperature compensation function; by connecting a temperature sensor (NTC resistor) between the +NTC/-NTC terminal of LDC-80 and the detecting point on the lighting system or the surrounding environment, output current of LDC-80 could be correspondingly changed, based on the sensed temperature, to ensure the long life of LED.

◎LDC-80 can still be operated normally when the NTC resistor is not connected and the value of output current will be the current level selected

through the IADJ. pin

◎NTC reference:

NTC resistanceOutput Current
<17.5KOutput current reduce as the resistance decreases
>17.5KNormal output current

Notes:

1. MEAN WELL does not offer the NTC resistor and all the data above are measured by using resistor.

2. If new brand of NTC resistor is applied,please check the temperature curve first.

◎Dimming function of the driver will be invalid when the "temperature compensation" function is in use.


Applications

LED panel lighting

Indoor LED lighting

Linear LED lighting


We hope to build sustainable development of enterprises, society and nature, and actively produce high-quality and cost-effective Alexa and Google Home Amazon Hot Sale OEM ODM LED Drivers Wholesale BLE WiFi Zigbee Dimmable Wireless LED Driver for LED Light. Our purpose is '100% client fulfillment by our product high-quality, price tag &amp, our staff service' and enjoy a superb reputation amongst clientele. Our tenet is to provide excellent service and quality. We work hard, innovate continuously, try our best to meet the needs of customers and create a win-win situation.

Hot Tags: meanwell dimmable led driver, China meanwell dimmable led driver manufacturers, suppliers, factory, built in power supply, sky light, led edge lit sign hanging blank acrylic sign, Recessed Linear LED Ceiling Lights, slimline led driver, led linear lighting

相关产品