Unique Charm Of Intelligent Lighting

Unique charm of intelligent lighting

1. The fully automatic dimming intelligent lighting control system can work in a fully automatic state. The system has several basic states, which will automatically switch to each other according to the preset time, and automatically adjust the illumination to the most appropriate level.

2. Natural light source makes full use of building equipment with light control function (such as hundred page curtains) to adjust and control natural light, and can also be connected with the lighting system. When the weather changes, the system can adjust automatically. No matter where or how the weather changes, the system can ensure that the indoor illumination is maintained at the preset level.

3. Consistency of illuminance generally, when designing the lighting of new buildings, lighting designers will take into account the attenuation of lamp efficiency and room wall reflectivity over time. Therefore, the initial illuminance is set higher. This design not only causes the inconsistent illumination of the building in the same service period (or the interval between two decorations), but also causes unnecessary energy waste due to the high illumination at the beginning. After the intelligent lighting control is adopted, although the illuminance is still high, due to the intelligent dimming, the system will maintain a constant illuminance in the lighting area according to the preset standard brightness without being affected by the reduction of lamp efficiency and the attenuation of wall reflectivity.

4. Intelligent conversion of light environment scene intelligent lighting control system can preset different scene modules. If necessary, it can be transferred to the required scene as long as it is operated on the corresponding control panel. Users can also adjust the scene in real time through the programmable control panel to meet different requirements. In addition, the user can also use a portable programmer to set the transformation of different scenes through the interface.

5. During operation, the energy-saving intelligent lighting control system can intelligently adjust the lighting of most lamps (including incandescent lamps, fluorescent lamps, sodium lamps equipped with special ballasts, mercury lamps, neon lamps, etc.), so as to provide sufficient lighting where and when needed. Turn off unnecessary lamps in time, make full use of natural light, and its operation has full energy-saving effect. The realization of intelligent lighting control can generally save 20-40% of electric energy, which not only reduces the user's electricity expenditure, but also reduces the power supply pressure.

6. Prolonging the service life of the light source as we all know, the main reason for the damage of the light source is the overvoltage of the power grid. As long as the working voltage is properly reduced, the service life of the light source can be prolonged. The intelligent lighting control system adopts the soft start mode, which can control the impulse voltage and surge voltage of the power grid, so as to prevent the filament from thermal shock, so as to prolong the service life of the light source by 2-4 times. It is of special significance for the areas where a large number of light sources are used and installation is difficult. In short, the combination of intelligence and lighting technology has built a sufficient technical platform to fully interpret the concepts of green and sustainable lighting such as energy saving, low consumption, long life, operation saving and people-oriented.